KH1508Ai / KH1516Ai User Manual
Security
The Security page is divided into six main panels, as described in the sections that follow.
Login Failures
For increased security, the Login Failures section allows administrators to set policies governing what happens when a user fails to log in successfully.
To set the Login Failures policy, check the Enable checkbox (the default is for Login Failures to be enabled). The meanings of the entries are explained in the table below:
Entry | Explanation |
|
|
Disable User Account | If this is enabled, after the allowed number of failures |
| have been exceeded, the user attempting to log in is |
| automatically locked out. No logins from the |
| username and password that have failed will be |
| accepted. The default is enabled. |
|
|
IP Address Locked | If this is enabled, after the allowed number of failures |
| have been exceeded, the computer attempting to log |
| in from that IP is automatically locked out. No logins |
| from that computer will be accepted. The default is |
| enabled. |
| Note: If the IP is changed, the computer will no |
| longer be locked out. |
|
|
Allowed | Sets the number of consecutive failed login attempts |
| that are permitted from a remote computer. The |
| default is 5 times. |
|
|
Timeout | Sets the amount of time a remote computer must |
| wait before attempting to login again after it has |
| exceeded the number of allowed failures. The |
| default is 3 minutes. |
|
|
Note: If Login Failures is not enabled, users can attempt to log in an unlimited
number of times with no restrictions. For security purposes, we recommend that you enable this function and enable the lockout policies.
122