Chapter 4. OSD Operation
Setting the Hotkey key combination
The keys used to enter the Hotkey Mode (see HOTKEY COMMAND MODE, page 31) can be switched between:
[Num Lock] +
by the following steps:
1.Enter the Hotkey mode with the:
[Num Lock] +
2.Press [H].
After you press [H], the command line displays HOTKEY HAS BEEN CHANGED for one second; then the message disappears and you automatically exit Hotkey mode.
Setting the OSD Hotkey combination
The Hotkeys used to access the OSD (see OSD HOTKEY, page 30) can be switched between [Scroll Lock], [Scroll Lock], [Ctrl], [Ctrl], and [Alt], [Alt] by the following steps:
1.Enter the Hotkey mode with the:
[Num Lock] +
2.Press [T].
After you press [T], the command line displays HOTKEY HAS BEEN CHANGED for one second; then the message disappears and you automatically exit Hotkey mode.
45