For example:
set port atm/usercomment="This is a comment string"
set port atm/usercommand=<An alternative syntax>
Within either form of quoted section, the corresponding close quote character may be embedded by prefixing with a backslash. So you could write:
set port atm/usercomment=<This is a "cell based" port>
set port atm/usercomment="This is a \"cell based\" port>
Mostly you probably won't need to worry about quotation, but be aware of it's effects if you do.
The remainder of this section describes the commands themselves.
4.2help
4.2.1Syntax
help [<command>]
4.2.2 Description
Display command information.
If used without the optional command name, a summary of the commands available will be displayed.
If used with a command name, brief usage information will be shown for the command.
Note: Commands listed but which are not covered by this documentation are not supported, and may not be present in future software releases.
4.2.3 Examples
help
help set port
Note: This command is not intended to replace this documentation, and provides only a very basic level of detail.
4.3version
4.3.1Syntax
version
4.3.2 Description
Display the BUN software version.
4.3.3 Example
version
