10.18.1Syntax
ipatm arpserver [<i/f> [<ATM address>here]]
10.18.2Description
Displays or sets the ATMARP server used for an interface, which must be an
The parameter here causes no ATMARP server to be used; only the local ATMARP cache will be consulted when setting up an SVC. This will normally be used when this machine is the ATMARP server for the local network.
Configuration saving saves this information.
10.18.3Example
mymachine> ip ipatm arpserver
ipatm arpserver atm here
mymachine> ip ipatm arpserver atm
47.0.83.10.a2.0.0.0.0.0.0.0.0.0.20.2b.4.3.8.0
mymachine> ip ipatm arpserver atm
ipatm arpserver atm
47.00.83.10.a2.00.00.00.00.00.00.00.00.00.20.2b.04.03.08.00
10.19 ipatm files
10.19.1Syntax
ipatm files
10.19.2Description
Lists the
10.19.3Example
mymachine> ip ipatm files
i/f atm 0 transmissions queued, 6 free connections, 4 listeners
0:on atm Connected to 192.168.220.48, idle 0ms
1:on atm Listening, (in use)
2:on atm Listening, (in use)
3:on atm Listening, (in use)
4:on atm Listening, (in use)
5:on atm Idle