device ether ether //edd mtu 1500 192.168.2.1
device flane ether //lec1 mtu 1500 192.168.55.1
#DISABLED
10.9enable
10.9.1 Syntax
enable [<i/f> [mtu <size>] [<IP address>]]
10.9.2 Description
Enables all interfaces, or just a specified interface. Can also be used to set the MTU and IP address on an interface when enabling it (or change them on an interface that is already enabled); see device on page 162 for details on the interfaces.
Configuration saving saves the MTU and IP addresses, but not the disabled/enabled state.
10.9.3 Example
mymachine> ip enable flane 192.168.56.3 |
| ||
ip/flane: IP address 192.168.56.3 |
| ||
mymachine> ip device |
|
| |
# | type | dev file | IP address |
device ether ether //edd mtu 1500 192.168.2.1 device flane ether //lec1 mtu 1500 192.168.56.3
10.10 errors
10.10.1Syntax
errors
10.10.2Description
Turns on tracing of various unusual events; equivalent to trace errors.
The errors command is hidden, not shown by ip help.
10.10.3Example
mymachine> ip errors
ip: currently tracing errors
10.11 etherfiles
10.11.1Syntax
etherfiles
10.11.2Description
Lists the file names for the underlying devices for all
