This command specifies that when using this channel, the user must log on using the specified protocol, and that they must provide any name/password combination which has been defined for that protocol, using the user command.
To remove this information on a channel, call theylogin with a single argument of none.
Configuration saving saves this information. By default, no login is required.
8.22<channel> tunnel <n> <tunnel protocol> <dial direction>
8.22.1Syntax
<channel> tunnel <n> <tunnel protocol> <dial direction>
8.22.2 Description
Logically associate the specified channel with the specified PPTP tunnel.
A single PPP channel can only be associated with a single interface, or a single tunnel.
Use info to find the current setting.
Calling with n=0 removes any association. This is the default state. Configuration saving saves this information.
The possible tunnel protocols are: pptp and l2tp.
The dial direction may be: in or out for
8.22.3Example
ppp3 tunnel 1 pptp out
8.23<channel> welogin
8.23.1Syntax
<channel> welogin <name> <password> [papchap] <channel> welogin none
8.23.2 Description
This command describes how we should log in to the far end when a connection is established. A name and password are supplied, and whether these should be used with the PAP or CHAP authentication protocol. CHAP is the default.
To remove this information on a channel, call welogin with a single argument of none.
If chap is specified, we will also log in using pap if the other end prefers this. If pap is specified we will only log in using pap.
Configuration saving saves this information. By default, no login is performed.
