pvccreate a1 32 a1 33

(at the switch console, if it is a Virata Switch)

ppp event 5

(at the console of the PPP ATMOS system)

ppp1 pvc 32 ppp 2 pvc 33 ppp 1 enable

ppp 2 enable

(they should now swap packets and synchronise)

ppp 1 status

This should show that the two ends are connected. No data will be exchanged.

8.2.2 IP dial-out over PPP

To perform a dial-out over a PVC, operate as follows:

First set up a router device for PPP to use. No IP address should be specified, so that the device is created but not enabled. The device name ppp_device should be used.

ip device add ppp_device ether //ppp/DEVICE=1 ppp 1 pvc <whatever>

ppp 1 welogin <name> <password> ppp 1 enable

If the configuration is saved at this point, the dial-in will be attempted automatically.

8.2.3 IP dial-in server setup

To create a system which can accept dial-in connections over PVCs, type the following:

Note – For a complex setup such as this, it may be more convenient to create it on another system using a text editor, then TFTP the setup into the ATMOS system.

Note – Assume that 8 dial-in PVCs are being created, numbered 32 to 39. These will be created as channels 2 to 9. A single IP subnet will be created, attached to a port of the router via interface 3. The IP subnet 192.168.200.0 will be used, with channel n assigning address 192.168.200.n to the far end. The server interface will take address 192.168.200.99.

ip device add ppp_device3 ether //ppp/DEVICE=3

192.168.220.99

Further IP setup may be needed, for instance to route the result to some other device such as the Ethernet port.)

pppinterface 3 localip 192.168.220.99 ppp 2 pvc 32 listen

ppp 2 interface 3

Page 53 Page 55
Page 54
Image 54
Atlantis Land A02-RA(Atmos)_ME01 manual IP dial-out over PPP, IP dial-in server setup
Page 53 Page 55

A02-RA(Atmos)_ME01 specifications

Atlantis Land A02-RA(Atmos)_ME01 represents a remarkable breakthrough in sustainable living and eco-friendly technology. Situated in a progressive ecological zone, this innovative habitat is designed to harmonize with its natural surroundings while providing modern amenities for its inhabitants.

One of the standout features of Atlantis Land A02-RA(Atmos)_ME01 is its integration of renewable energy sources. The habitat utilizes solar panels that are seamlessly incorporated into its structure, harnessing sunlight to power essential systems. Additionally, small wind turbines are strategically placed to capture wind energy, making the habitat largely self-sufficient and reducing reliance on non-renewable energy sources.

Another significant characteristic of this habitat is its advanced water management system. The A02-RA(Atmos)_ME01 employs rainwater harvesting technology, collecting and purifying rainwater for domestic use. This system not only conserves water but also helps reduce the overall ecological footprint of the habitat. Furthermore, graywater recycling ensures that water from sinks and showers is treated and repurposed for irrigation and other non-potable uses.

The architecture of Atlantis Land A02-RA(Atmos)_ME01 reflects its commitment to sustainability. Built with eco-friendly materials, the structure features large windows to optimize natural light and promote passive solar heating. The design also incorporates green roofs, which provide insulation, reduce stormwater runoff, and support local biodiversity by creating habitats for wildlife and plants.

For the comfort and convenience of its residents, the habitat is equipped with smart home technology. This system allows occupants to control lighting, heating, and water usage through a central device or mobile application, promoting energy efficiency and enhancing daily living. Additionally, the interior spaces are designed with versatility in mind, allowing for easy reconfiguration to accommodate various lifestyles and needs.

Lastly, community engagement is a central theme in the A02-RA(Atmos)_ME01 design. Shared spaces, such as gardens and recreation areas, encourage social interaction and foster a sense of belonging among residents. The emphasis on community promotes collaboration in sustainability initiatives, empowering individuals to take an active role in preserving their environment.

In summary, Atlantis Land A02-RA(Atmos)_ME01 stands as a model for future living, showcasing how innovative technology and thoughtful design can create a sustainable, comfortable, and community-oriented habitat. Its commitment to harnessing renewable resources, efficient water management, and smart home integration makes it an exemplary blueprint for eco-friendly living.
Top Page Image Contents