8.8 <channel> enable
8.8.1 Syntax
<channel> enable
8.8.2 Description
Set the enable flag for a PPP channel. By default, this is disabled.
In the PPP state machine, this flag sets the PPP link to open. If it is already open, there is no effect.
Configuration saving saves this information. By default, all channels are disabled.
8.9 <channel> event
8.9.1 Syntax
<channel> event [<n>]
8.9.2 Description
Read or set the overall trace output level.
Configuration saving does not save this value. The default event level is 1. The event levels are shown in the table below:
Level | Description |
|
|
1 | Only very serious errors reported |
|
|
2 | Definite protocol errors or very significant events reported. |
|
|
3 | Links going up/down reported. |
|
|
4 | Every packet and significant state change is reported. |
|
|
5 | Every packet sent/received is disassembled, and hex dumped. |
|
|
8.10<channel> hdlc
8.10.1Syntax
<channel> hdlc [10]
8.10.2 Description
If 1, use an HDLC header on the front of transmitted packets and require one on received ones. This consists of two bytes,
Call with no argument to find the current setting. The default value is 0 (disabled).
Configuration saving saves this information.
If not set, and a packet is received with an HDLC header, the channel goes into a learned HDLC mode and sends packets with the HDLC header. Thus, interoperation with
