Avaya 9600 manual Telephone Initialization Process, Telephone to Network

		Telephone Initialization Process
Table 2: Administrative Checklist (continued)
Task	Description	For More Information See:
Installation of		Avaya one-X™ Deskphone Edition
telephones in the		for 9600 SIP IP Telephones
network		Installation and Maintenance Guide.
Allow user to modify	Set the following parameters in the	9600 Series SIP IP Telephones
Options, if applicable	settings file:	Customizeable System Parameters.

ENABLE_CALL_LOG

ENABLE_CONTACTS

ENABLE_MODIFY_CONTACTS

ENABLE_PRESENCE

PROVIDE_OPTIONS_SCREEN

PROVIDE_NETWORKINFO_SCR

EEN

PROVIDE_LOGOUT

2 of 2

Telephone Initialization Process

These steps offer a high-level description of the information exchanged when the telephone initializes and registers. This description assumes that all equipment is properly administered ahead of time. This description can help you understand how the 9600 Series SIP IP Telephones relate to the routers and servers in your network.

Step 1: Telephone to Network

The telephone is appropriately installed and powered. After a short initialization process, the telephone identifies the LAN speed and sends a message out into the network, identifying itself and requesting further information. A router on the network receives and relays this message to the appropriate DHCP server.

Step 2: Telephone to LLDP-Enabled Network

An LLDP-enabled network provides information to the telephone, as described in Link Layer Discovery Protocol (LLDP) on page 101. Among other data passed to the telephone is the IP Address of the HTTP or HTTPS server.

Issue 2 December 2007 21