Avaya 9600 manual Mac / Phy, TIA Lldp MED LLDP-MED, Bootname, Appname

Administering Telephone Options

Table 13: LLDPDU Transmitted by 9600 Series SIP IP Telephones (continued)

Category	TLV Name (Type)	TLV Info String (Value)
Basic Optional	System Name	The Host Name sent to the DHCP server in
		DHCP option 12.
Basic Optional	System Capabilities	Bit 2 (Bridge) will be set in the System
		Capabilities if the telephone has an internal
		Ethernet switch. If Bit 2 is set in Enabled
		Capabilities then the secondary port is
		enabled.
		Bit 5 (Telephone) will be set in the System
		Capabilities. If Bit 5 is set in the Enabled
		Capabilities than the telephone is registered.
		Mgmt IPv4 IP Address of telephone.
Basic Optional	Management Address
		Interface number subtype = 3 (system port).
		Interface number = 1.
		OID = SNMP MIB-II sysObjectID of the
		telephone.
IEEE 802.3	MAC / PHY	Reports autonegotiation status and speed of
Organization	Configuration / Status	the uplink port on the telephone.
Specific
		Media Endpoint Discovery capabilities = 00-33
TIA LLDP MED	LLDP-MED
	Capabilities	(Inventory, Power-via-MDI, Network Policy,
		MED Caps).
TIA LLDP MED	Network Policy	Tagging Yes/No, VLAN ID for voice, L2 Priority,
		DSCP Value.
		MODEL - Full Model Name.
TIA LLDP MED	Inventory – Hardware
	Revision
TIA LLDP MED	Inventory – Firmware	BOOTNAME.
	Revision
		APPNAME.
TIA LLDP MED	Inventory – Software
	Revision
TIA LLDP MED	Inventory – Serial	Telephone serial number.
	Number
		Avaya.
TIA LLDP MED	Inventory –
	Manufacturer Name
TIA LLDP MED	Inventory – Model	MODEL with the final Dxxx characters
	Name	removed.
		2 of 3

102 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0