Introduction
●RTCPMON
●RTCPMONPORT
●SIP_MODE
●SIPCONFERENCECONTINUE
●TLSSRVRID
●VU_MODE
●VU_TIMER
●WMLEXCEPT
●WMLHOME
●WMLIDLETIME
●WMLIDLEURI
●WMLPORT
●WMLPROXY
The following parameters have been modified or renamed:
●Parameters PHYxDUPLEX and PHYxSPEED were combined. PHY1SPEED has been renamed to PHY1_OPERATIONAL_MODE. This parameter now includes the current duplex mode. PHY2SPEED has been renamed to PHY2_OPERATIONAL_MODE. This parameter now includes the current duplex mode.
●The OUTBOUND_SUBSCRIPTION_REQUEST_DURATION default value has been changed from 17280000 to 86400 seconds. This parameter can now be set through the settings file.
●The dimensions for SNTP_SYNC_INTERVAL and
SNTP_SYNC_RANDOMIZATION_INTERVAL have changed from seconds to minutes.
●EXCHANGE_CONTACTS_ENABLED has been renamed to
USE_EXCHANGE_CONTACTS.
●EXCHANGE_CALENDAR_ENABLED has been renamed to
USE_EXCHANGE_CALENDAR.
●The default value definition of ENABLE_G726 has changed from 0 to 1.
●The default values and sidetone definitions of the audio parameters AUDIOSTHD and AUDIOSTHS have been modified.
●WAIT_FOR_REGISTRATION_TIMER can now be set through the settings file.
The following configuration parameters are no longer valid and have been removed:
●PHY1DUPLEX
●PHY2DUPLEX
●INTER_DIGIT_DIALING_TIMEOUT_DURATION
12 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0