Avaya 9600 manual Services SES

Communication Manager Administration
Table 8: CM/SIP Configuration Requirements (continued)
Task/Form	Command	Field(s)	Value(s)
After defining the FACs,	change		Used to support both OPS
define the FNEs not	off-pbx-telephone		and Extension to Cellular.
provisioned by CM	feature-name-
feature buttons using the	extensions
command
Set the appropriate	change cos	Varied	y (Yes) or n (No)
service permissions to
support OPS features on
the Class of Service
form
Enable applicable calling	change cor	Varied	To use the Call Pickup
features on the Class of			feature, the Can Use Directed
Restriction form			Call Pickup and Can Be
			Picked Up By Call Pickup
			fields must be set to "y" for
			the affected stations. Note
			that Page 3 can be used to
			implement a form of
			centralized call screening for
			groups of stations and trunks
Add a station for each	add station xxxxxx	Extension	Assign the same extension
SIP phone to be	(where xxxxxx		as the CM call server
supported using the	represents the		extension administered in SIP
Station form (page 1)	extension number)		Enablement Services. See
			Chapter 5: SIP Enablement
			Services (SES)
			Administration for SES
			configuration information.
		(Station) Type	Use 9620 or 9630.
		Port	System-populated.
		Coverage Path	For voice messaging or other
			hunt group, if available.
		COS and COR	Same values as administered
			in the previous COS & COR
			section(s).
		Name	The person associated with
			the telephone. This name
			should match what is entered
			for name in the Avaya SES
			proxy configuration.
		Message Lamp	Enter the extension of the
		Ext	station you want to track with
			the message waiting lamp.
			(Usually the same extension
			initially entered on the Station
			form.)
			2 of 4

46 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0