Avaya 9600 Calltransfer, Mode, Callfwdaddr, Callfwddelay, Callfwdstat, Cnaport, Cnasrvr, Cnglabel

Administering Options for the 9600 Series SIP IP Telephones

Table 11: 9600 Series SIP IP Telephones Customizeable System Parameters (continued)

Parameter Name	Default	Description and Value Range
	Value
CALL_TRANSFER_	0	When ENABLE_AVAYA_ENVIRONMENT=0, this
MODE		parameter indicates how transfers are performed:
		0 = attended transfer
		1 = unattended transfer
CALLFWDADDR	" " (Null)	The URI to which calls are forwarded in 3rd party
		(non-Avaya) environments only.
CALLFWDDELAY	1	Third-party (non-Avaya) environments only. Specifies the
		number of ring cycles generated at the phone before the
		call is forwarded to the Call Forwarding Address, if call
		forwarding on "No answer" is selected in 3rd party
		environments. Valid number of ringing cycles are 0-20.
CALLFWDSTAT	0	Third-party (non-Avaya) environments only. Specifies the
		sum of the allowed Call Forwarding permissions. This
		parameter controls which of the Call Forwarding Feature
		Buttons are made visible and active for the user in 3rd
		party environments. Valid values are:
		0 = no Call Forwarding permitted.
		1 = Call Forward Unconditional only permitted.
		2 = Call Forward Busy only permitted.
		4 = Call Forward No Answer only permitted.
		Others = sum of Call Forward types permitted.
CNAPORT	50002	Transport-layer port number to be used for registration to
		CNA server for network analysis. Valid range is 0-65535.
CNASRVR	" " (Null)	List of CNA server IP or DNS address(es). Used to
		connect to CNA server for network analysis (in case of
		several entries first address always first, etc.). Format is
		0 to 255 characters: zero or more IP addresses in dotted
		decimal or DNS name format, separated by commas
		without any intervening spaces. Currently set to a
		maximum of 5 servers.
CNGLABEL	1	Indicates whether end user can personalize button
		labels. Valid values are:
		0=User cannot change button labels
		1=User has ability to change button labels
CONFIG_ SERVER	“” (Null)	Address of Avaya configuration server (currently, this
		parameter, when used, is set to the PPM server
		address). Format is dotted decimal or DNS format,
		separated by commas, with no spaces (0-255 ASCII
		characters, including commas, optionally followed by
		colon and port number).
CONFIG_SERVER_	0	Indicates whether or not secure communication via
SECURE_MODE		HTTPS is required to access the configuration server.

0 = Use HTTP.

1 = Use HTTPS.

2 = Use HTTPS if the SIP transport type is TLS, otherwise use HTTP.

2 of 21

Issue 2 December 2007 75