Administering Telephone Options
Table 14: Impact of TLVs on System Parameter Values
System | TLV |
|
Parameter Name | Name | Impact |
|
|
|
PHY2VLAN | IEEE 802.1 Port | System value changed to the Port VLAN identifier in |
| VLAN ID | the TLV. |
|
|
|
L2QVLAN and | IEEE 802.1 VLAN | The system value is changed to the TLV VLAN |
L2Q | Name | Identifier. L2Q is set to 1 (ON). |
|
| A check is made as to whether a reset is necessary |
|
| to obtain a new IP address due to a change in the |
|
| values of the parameters L2Q or L2QVLAN. |
|
| VLAN Name TLV is ignored if: |
|
| ● the value of USE_DHCP is “0” and the value |
|
| of IPADD is not “0.0.0.0”, or |
|
| ● the current value of L2QVLAN was set by a |
|
| TIA LLDP MED Network Policy TLV, or |
|
| ● the VLAN name in the TLV does not contain |
|
| the substring “voice” in |
|
| |
|
| anywhere in the VLAN Name. |
L2Q, | TIA LLDP MED | L2Q - set to “2” (off) If T (the Tagged Flag) is set to |
L2QVLANID, | Network Policy | 0; set to “1” (on) if T is set to 1. |
L2QAUD, | TLV | L2QVLAN - set to the VLAN ID in the TLV. |
L2QSIG, |
| L2QAUD and L2QSIG - set to the Layer 2 Priority |
DSCPAUD, |
| value in the TLV. |
DSCPSIG |
| DSCPAUD and DSCPSIG - set to the DSCP value |
|
| in the TLV. |
|
| A check is made as to whether a reset is necessary |
|
| to obtain a new IP address due to a change in the |
|
| values of the parameters L2Q or L2QVLAN. |
|
| This TLV is ignored if: |
|
| ● the value of USE_DHCP is “0” and the value |
|
| of IPADD is not “0.0.0.0”, or |
|
| ● the Application Type is not 1 (Voice), or |
|
| ● the Unknown Policy Flag (U) is set to 1. |
|
|
|
SIPPROXYSRVR | Proprietary Call | SIPPROXYSRVR will be set to the IP Address(es) |
| Server TLV | in this TLV value. |
TLSSRVR and | Proprietary File | TLSSRVR and HTTPSRVR will be set to the IP |
HTTPSRVR | Server TLV | Address(es) in this TLV value. |
|
|
|
104 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0