AVerMedia LX5000 User’s Manual

Chapter 4 System Configuration and

Operation

4.1 Entering the System

Before you start running LX5000 system, the system will perform a routine hardware check-up and scan all hard disks. In general, the hard disk scan takes only a few seconds. But if the hard disk was abnormally shutdown or had been damaged, the system will do a complete scan. The scan time is dependent on the hard disk size. (with a complete scan, it takes about 1 minute to scan 30GB).

If you re-installed your LX5000 system and forgot your previous password, you can choose to remove the previous password setting when the first time you enter the system after the re-

installation.

Remove password setting (y/n)?

After the hardware check-up is finished, a dialogue box will display prompting you to set some basic configurations. You only have 15

seconds to finish all the selections on this screen.

19

AVerMedia LX5000 User’s Manual

For Select Language, you can select from English, Traditional Chinese, Simplified Chinese, Japanese, German, French, Polish, and Czech.

After your selection, a pop-up window besides will allow you to utilize the system application.

Enter user serial number in Serial Number field to further use AVerMedia LX5000

20