AVerMedia LX5000 User’s Manual

Auto Pan

Click this button to instruct the PTZ camera to begin AutoPan based on the AutoPan configurations: preset positions, speed, and time to stay. Preset positions are the different views that the camera will pan to. Speed is the speed that the camera moves between preset positions (e.g. 30° / second). Finally, time to stay is the amount of time the camera stays fixed before or after, depending on your PTZ model, moving to the next preset position.

Preset Positions

Once Preset Positions are configured (see Setup below) you can, at any time during surveillance turn the camera to any of the preset positions by clicking on buttons 1~16.

73

AVerMedia LX5000 User’s Manual

Setup

Click this button to enter the PTZ Setup Menu to set the desired preset positions. The PTZ Setup Menu dialog box is explained towards the end of this section.

Focus in

Use this button during surveillance to decrease the focal length for a clearer picture.

Focus out

Use this button during surveillance to increase the focal length for a clearer image.

Zoom in

Use this button during surveillance to zoom in and enlarge the size of the image.

Zoom out

Use this button during surveillance to zoom out and reduce the size of the image.

Select one of the 16 preset positions from the Preset Position Number buttons, then select the speed from one of the 4 Speed buttons (the higher the level, the faster the speed), and then use the Up/Down/Left/Right buttons to adjust the position of the camera.

74