AVerMedia LX5000 User’s Manual

6.3 Operating RemoteManager

6.3.1 Center Management

Users can take advantage of this section to manage the connectable servers’ detailed information.

The setting should be placed before you commence configuring the system at the first time. There are two ways to connect server:

Connection via Modem to Modem (refer to Appendix A for the connection):

First you should connect to the server manually via modem before accessing Remote Manager. Then, it is allowed to add a new server as a dial-up server is installed by server and a dial-up networking established by client.

93

AVerMedia LX5000 User’s Manual

Connection via TCP/IP

Once the function “Enable Remote View server via TCP/IP” in the setting of Networking section has been checked, you are allowed to add a new server via TCP/IP.

To offer the complete information, finish the steps below:

1.Click Center Manager button and the following window appears.

2.Click Add to include an available server into server list. The Add Server window will show as follows or click Delete or Update to modify the setting.

3.Enter the IP Address of the desired

server and the same port number as the setting in Networking section of the server (default 9090). Click OK to start connecting or Cancel to quit the setting.

4.The pop-up window of Add Server will show the Server Name automatically if the IP Address is correct and has been connected. Finish the user’s information given by the specified server. Click OK to save to add the new server in

center management or Cancel to quit the setting.

94