AVerMedia LX5000 User’s Manual

the grids will turn yellow on which the further information will be shown. With the information go to System setup → Alarm setup → Relay alarm to find out the generated sensor.

Time/Date

This field contains the current time (hour:minute:second) and date (year/month/date). You can double-click here to reset the time and date in the displayed dialog box besides.

Software Version

It displays the software version of the AVerMedia LX5000 system

Hard Disk Status

This information shows the total disk capacity and available disk space of all the hard disks in the system.

Enlarging Display

Click “1-Camera Display” this button to view image from a single camera and switch any camera into a specific camera. Double clicking on any of the images will enlarge that image and move it into a corner.

23

AVerMedia LX5000 User’s Manual

Since that one image was enlarged the total number of remaining images will be reduced. In the example below, the 16-image display (figure 1) is reduced to a 13-image display after one of the images was enlarged. You can repeat this process until you are left with 7 images (3 large and 4 small – figure 8). If you further click on any image, the screen will remain as 7-camera display placing the last double-clicked image in the upper left corner. You can also do this with the 9-Camera Display mode, but the initial double-click will turn the 9-screen display into a 16-screen display.

Figure 1

Figure 2

Figure 3

Figure 4

Display mode

The following grid shows how camera images are positioned on the monitor when in the different split screen modes. The numbers in the squares correspond to the camera numbers.

1

24