AVerMedia LX5000 User’s Manual
2.Change channel’s names by directly click on
.
3.Arrow down the list to select the Server’s and Camera’s names for each channel.
4.Check Display to show the images on the screen and Recording to enable the recording function for each channel.
5.Click OK to save or Cancel to delete the previous arrangement.
The listed servers and cameras in the
Schedule RecordingThe function allows you to plan the recording schedule by date or weekday for all the channels.
Do the steps following:
1.Click Schedule Recording to get the window below:89
AVerMedia LX5000 User’s Manual
2.Check the recording by date or by weekday and choose the time by clicking the arrow of the
box 
. The following window will show as:
3.Click on the yy/mm position directly and use the upper left and upper right arrows and the red circle in the bottom left corner window to specify a date to be an operating time.
4.Click 
to confirm the time setting. A settled time will appear on the right blank box. Click Delete to delete the previous time setting.
5.Set the Start and End time by the up and down arrows 
in Time field.
6.Check the desired cameras to be involved into the schedule in Camera field.
7.Mentioned comment is allowed by using Add/ Delete/ Update/ Restore buttons for the further information while recording.
8.Click Ok to save or Cancel to delete the previous arrangement.
Once the recording has been generated as the schedule, the recording status is observed in Channel Status field.
6.2.5
Network SetupIf you want to transmit images for remote surveillance via TCP/IP, first click this button to pop up the following dialogue.
90