AVerMedia LX5000 User’s Manual

1.First determine a UDP port (Default 9190) to receive the images from server.

2.Select TCP port connecting to server via Auto assignment or specify at least 32 ports at a range from 1025 to 65535 for transferring image and receiving commands.

3.Click OK to save the setting or Cancel to quit the dialogue without saving.

Make sure leave a free port (9091 recommended) in server for connecting. Besides, establish another fixed UDP port (9191) for transmitting images from server to client. In addition, a firewall NAT

function should be configured to enable the mutual transmission. The following is the detailed illustration to configure the connection:

91

AVerMedia LX5000 User’s Manual

6.2.6 Sensor Status

The sensor status is viewed on the consequent window by clicking this button.

6.2.7 Relay Status

The relay status is viewed on the consequent window by clicking this button. Otherwise, you can set the duration of the relay output after a relay triggered. Note that the duration value”0” denotes the incessant relay output.

6.2.8 Alarm Control

It is available to choose the server and decide to enable or disable the corresponding alarms.

1.Click Alarm Control to see the window for alarm status.

2.To enable an alarm, simply click on

in the Status column and

change the status to.

Click the OK button to save the setting.

6.2.9 Back to Main Menu

Back to the main menu be clicking this button.

92