AVerMedia LX5000 User’s Manual

Direction Speed

There are four speeds to decide the moving speed of the PTZ camera

during adjusting Direction Control

Focus in

Decrease the focal length of the camera to focus on the image.

Focus out

Increase the focal length of the camera to focus on the image.

Zoom in

Zoom in to enlarge the image of the object.

Zoom out

Zoom out to reduce the image of the object.

Dwell (Sec)

During AutoPan, this button determines the time for the camera to stay (1~60 seconds) at one position before rotating to the next position.

Rotation Speed (deg/s)

You can set the speed (5~255 deg/s) by the left and right arrows at which the camera rotates from its current position to the next preset position.

Save

After you finish setting a preset position, you need to click this button to save it and go on to set the next preset position.

Clear

Click this button to clear the setting for the current preset position.

99

AVerMedia LX5000 User’s Manual

Group

Each PTZ camera has 4 groups to comply with the position sequences

as follows:

 

Group 1: 1~4 positions

Group 2: 5~8 positions

Group 3: 9~12 positions

Group 4:13~16 positions

AutoPan

 

Choose a group number first, and click this button to enable this function.

Back to Main Menu

Click here to back to main menu.

6.4 Start Recording

Manually enable the recording setting arranged in the Schedule Recording section by clicking this button. Meanwhile, the recording status is visible in the Channel Status field and Start Recording button will turn into transparent red.

6.5 Exit RemoteManager

Click this button to exit RemoteManager. First a password control window will prompt you to enter the password to make sure your authorization. Then a window below will appear to confirm your quit. Click OK to exit or Cancel to back to the system

100