AVerMedia Technologies LX5000 Icon, Icon, Exit, Color, Color, Relay, Relay, Status, Status, Camera, Sensor, Camera, Sensor, Camera, Vendor, E-MapChose, Recording Setup, 1.PTZ Camera Menu

AVerMedia LX5000 User’s Manual

Show Cameras

	E-Map Chose
Exit	State	Cameras, Sensors,
		Relays State

1.Chose a map to view by clicking the map button ….

2.Check out Cameras, Sensors, Relays on the map

Focus on the desired event by clicking on the event button on the map.

3.Monitoring Cameras, Sensors, and Relays

If any event is focused, the relative information will present in the information field; otherwise, you can monitor the status of the camera in the right upper window. The different colors of the icons on the map window will turn to different flashing colors accounting for as follows:

Icon	Color	Status	Icon	Color	Status
	Yellow	Normal		Yellow	Normal
Camera			Sensor

71

AVerMedia LX5000 User’s Manual

	Blue	Video Loss		Red	Activated
Camera			Sensor
	Green	Motion		Yellow	Normal
Camera		Detection	Relay
				Red	Activated
			Relay

4. Click Exit to leave for main menu.

4.3.4 PTZ control (Pan-Tilt-Zoom Camera)

After the PTZ cameras are connected to the system, you may click to access the following interface to configure the PTZ camera.

1.PTZ Camera Menu

After you install the PTZ camera, remember to enter the

Vendor and Address (Decimal) of the PTZ camera in the

Recording Setup page, and then click Save button to update the information. If you haven’t configured the PTZ camera in the

Recording Setup page, the button cannot be used.

72