AVerMedia LX5000 User’s Manual

Please follow the following steps to set the electronics map:

1.Input the background map: Press “Edit" button and get into BMP, JPEG edit program to modify and edit the background map. Or press

the “input" button to input the existing map directly.

2. Camera, sensor, transformer: Depends on the install condition to click and pull out the camera, input sensor and output transformer from each column to the background map. If you want to delete them, you can just simply pull them back to the original columns directly.

45

AVerMedia LX5000 User’s Manual

3.Instruction: You can input the related exploitation and information of electronics map from the instruction column. The map name and

instruction the status rows of electronics map Default Value: Set the camera at the default value. Refresh: Set all the values back to the previous values. Save: Save the modified values and parameters.

Quit: Quit the recording setting screen.

Network SetupNetwork Service

You can start the Remote Management and Web Cam, then set the TCP/IP server port (Default value is 9090), and HTTP server port (default value is80) information. Please select the camera that you want to open the connection.

IP Configuration:Enable DHCP

Please select this column, then you can get the dynamic IP address. If your LSS digital monitor system is at the dynamic IP condition, you can log on ddns.avers.com.tw to use the DDNS registration web page to register your domain name and password. Then, you can input your domain name and password from this column.

Regarding the registration of DDNS domain registration, please refer to the attached file 1.

Input the IP address, net mask, gateway, and hostname.

Dynamic DNS

In case a dynamic server is severed, please register a domain name with the IP address: ddn.avers.com.tw on line. Refer to Appendix B for

46