AVerMedia LX5000 User’s Manual

Click Add to create an alarm and the detailed configuration window will pop up:

This window contains Condition and Action configurations. Actions will be performed according to the setup of conditions.

To add an alarm following the steps below:

1.Identify alarm name and alarm description.

2.Configure ConditionSensor

Select the cameras for the trigger according to sensor device, high electricity input (high to low), and ex: a light is being turned off, and low electricity input (low to high), ex: a door is being opened, camera

49

AVerMedia LX5000 User’s Manual

motion detection, and camera video loss.

Motion Detection

Select the cameras for the trigger according to motion detection configuration in Recording Setup.

Video Loss

Select the camera number whose video is lost during monitoring.

Configure Action

Recording

Select the cameras to behave recording once any of the conditions is triggered.

Post-alarm frame number

Set the frame number according to which the system will last recording once any of the conditions is triggered.

Relay

Select the cameras to act relay while any of the conditions is met.

Full Screen on Motion

During surveillance, you can have the system to instantly pop up the image (1-camera display mode) that has motion detected for a user- defined length of time.

Relay and Full Screen on Motion retrieve

After an input is triggered, the output of relay and full screen on motion will revert to normal status after the time you set.

Email alarm

You can email alarm messages once an alarm is triggered. Follow the instructions below.

A.Check Email setting to enable this function.

B.Click to bring up the dialog box below to set up the email information.

50