Avery 676 user manual Customer Responsibility, Location of Printer

Customer Responsibility

Location of Printer

The printer weighs approximately 250 Lbs (113.4 Kg) and requires a table of sufficient quality and strength to handle this load while the printer is operating. AVERY DENNISON recommends an industrial type worktable having the approximate dimensions of 96" (245.8cm) wide to 30" (76.2Ccm) deep to 32" (81.3cm) high. Refer to Figure 2.

Figure 2 - Recommended Workstation Layout.

The location of the AVERY DENNISON 676 LKP printer should be based on human factors. The printer should be located in an area that maintains optimum flow of your product while providing for the operator’s comfort. AVERY DENNISON has taken significant steps to ensure that the operator controls and operations are easily accessible. This goal can only be met, however, if the printer is also located with human factors in mind. These include the height of the printer, the space around the printer, and the accessibility to the printer.

The AVERY DENNISON 676 LKP printer is a high-resolution 300 DPI thermal printer. While AVERY DENNISON has designed the printer to be reasonably quiet, it is recommended to locate the printer in an area where printing and cutting repetitious noise is acceptable.

The AVERY DENNISON 676 LKP printer is designed to operate in conjunction with the AVERY DENNISON Lokprint™ II box and either an Ultrasonic Finisher, a Cold Knife Finisher or a Rewind Unit.

User Manual Model 676 LOKPRINT® Customer Responsibility • 7