Operators Manual
ALS 330/430
8.3.1Product sensor
The product sensor starts the labelling. The source of the signal could be a optical sensor, a switch or a signal from a PLC. The time between start signal and start of dispensing (adjusted with POS) should be as small as possible. This means that an optical sensor should be placed 10 to 20 mm before the dispensing edge. The minimum distance is necessary for the internal speed compensation.
The machine is supplied as standard with one socket for connecting the product sensor. You may either use a NPN or PNP type sensor output.
Supply
Signal+
Signal-
GND
| 5 | 5 |
|
brown | 9 | 9 | red |
| 4 | 4 |
|
| 8 | 8 |
|
| 3 | 3 | white |
| 7 | 7 |
|
white | 2 | 2 | blue |
| 6 | 6 |
|
black | 1 | 1 | black |
blue
27
34
26
13
+24V
GND
Figure 22 Example for connecting an NPN sensor (Datalogic)
CN33
+24V
Supply
Signal+
Signal-
GND
brown
white
black
blue
5 | 5 |
|
9 | 9 | red |
4 | 4 |
|
8 | 8 |
|
3 | 3 | white |
7 | 7 |
|
2 | 2 | blue |
6 | 6 |
|
1 | 1 | black |
27
34
26
13
GND
Figure 23 Example for connecting an PNP sensor (Datalogic)
CN33
Release 4/06 | Page 61 | Connections and signals |
