Operators Manual

ALS 330/430

4.2.4Lead screw adjustment

For adjustments of the dispensing edge towards or away from the conveyor, the lead screw integrated in the labelling head should be used. Positions can be read from the scale on the dispensing edge bars.

4.2.5Adjustment of the dispensing edge

Loosen handle 1 and 2 and turn lead screw Z. Once the adjustment is completed pull the handles tight again.

Figure 13 Dispensing edge

4.2.6Printer adjustment

If your labeller is equipped with a printer, you adjust the print position as well with the lead screw Z. In this case loosen handle (orange) for printer and handle 1. Once the adjustment is completed, pull the handles tight again.

Release 4/06

Page 28

Operation

Page 30
Image 30
Avery ALS 330/430 manual Lead screw adjustment, Adjustment of the dispensing edge, Printer adjustment