Chapter 6: Authentication Services 91
PAP - Password Authentication Protocol
CHAP - Challenge Handshake Authentication Protocol (default)
MS-CHAP - Microsoft Challenge Handshake Authentication Protocol
b. In the Shared Secret field, type the shared secret, which is a password protected field. (For
the shared secret, Microsoft’s implementation allows up to 128 ASCII characters and
CISCO’s implemetation allows up to 32 ASCII characters; other servers may have a
different limit.)
NOTE: If you change the authentication type, you will be required to enter the shared secret.
c. Re-enter the shared secret in the Confirm Shared Secret field.
d. Click Save.
6. To change the group authorization settings, click Group Authorization in the side
navigation bar.
The Method field will display the group authorization method configured when the TACACS+
authentication service was added. This field cannot be changed.
a. In the Service field, type the appropriate TACACS+ service.
If TACACS+ privilege level attribute is the method, the default value is shell.
If TACACS+ custom attribute for group names is the method, the default value is raccess.
b. If the TACACS+ service requires a protocol for authorization requests, type the protocol
in the Protocol field.
c. In the Attribute Name field, type the attribute name that the DSView 3 server will receive
after an authorization request.
If TACACS+ privilege level attribute is the method, the default value is priv-lvl.
If TACACS+ custom attribute for group names is the method, the default value is
group_name.
d. Click Save.
7. Click Close. The User Authentication Services dialog box will appear.
RSA SecurID external authentication service
When an RSA SecurID external authentication service is added, the DSView 3 software obtains
user authentication information and relays it to the RSA Authentication Manager. The RSA
Authentication Manager’s validation results are then relayed to the user. The DSView 3 software
also supports new PIN operations, next tokencode operations, RSA Authentication Manager
Replica functionality and name locking. The DSView 3 software is the agent type Net OS Agent.
See RSA SecurID login on page 17 for information about the login process when an RSA SecurID
external authentication service is used. Consult the RSA Authentication Manager documentation
for additional details.