124 DSView 3 Software Installer/User Guide
4. The Confirm Target Device Merge window will open. Click Next to confirm merging the
connection paths into the specified destination target device. See Connections to Units on
page 162.
5. The Completed Successful window will open.
6. Click Finish.
Merging or splitting cascade switches
You may use the Merge Cascade Switch wizard to modify the name/type of one or more cascade
switches that belong to the same appliance in the DSView 3 software database. You may also
merge or split two or more multi-user cascade switches from the same appliance.
To merge or split cascade switches:
1. In a Units View window containing cascade switches (see Accessing Units View windows on
page 98), click on the cascade switch name. The Unit Overview window will open.
2. Click the Merge Target Devices icon or link. The Merge Cascade Switches W izard will appear.
Click Next.
3. The Cascade Switch Configuration window will open. The Appliance Port column lists the
ports in the appliance that are connected to cascade switches.
4. You may change the cascade switch type by selecting from the drop-down menu. If you change
the cascade switch name, it must contain 1-64 characters and must not exist in the DSView 3
software database unless it is associated with a multi-user cascade switch.
5. To merge cascade switches, click the checkboxes to the left of the entries, then click Merge.
6. To split a previously merged set of cascade switches, click the checkbox to the left of the entry,
then click Split.
7. Click Next. The Operation in Progress window will open, followed by the Completed
Successful window.
8. Click Finish.