Chapter 10: Managing Units 135
Enable All turns all traps on; Disable All turns all traps off.
8. Click Save and then click Close. The Units View window will open.
Target Device Settings
For information about power device settings, see Power Devices on page 147.
To display a list of target devices that are attached to a managed appliance or
initiate a push/pull name operation:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 98), click on the name of an appliance.
2. Click Appliance Settings in the side navigation bar, then click Target Devices.
3. The Target Devices window will open.
4. To initiate a pull or push name operation (see Name Synchronization on page 115), click the
checkboxes to the left of one or more device names. To select all names on the page, click the
box to the left of Appliance Name at the top of the list.
For a pull operation, click Pull Name.
For a push operation, click Push Name.
Customizing the Target Devices window
The following fields may be displayed in the Target Devices window. Use the Customize link to
add or remove fields in the display. See Using the Customize link in windows on page 26.
Name in Appliance - Name of the target device in the appliance.
Name in DSView - Name of the target device in the DSView 3 software database.
Connection - Connection path to the target device in the appliance.
To change the appliance name for a target device:
1. In a Units View window containing appliances, click on the name of an appliance.
2. Click Appliance Settings in the side navigation bar, then click Target Devices.
3. The Target Devices window will open. Click on a target device name.
4. Change the appliance name for the target device. If the automatic name pull feature is enabled,
see Automatic name pull on page 117 for the effect.
Target Device Services
You may add or remove support on a target device for third party services such as Terminal
Services and VNC. Before adding support for a service, the service must be properly installed and
configured on the target device.
Once support for a service has been added, you can launch a session for that service using
several methods: