56 DSView 3 Software Installer/User Guide
To display server properties:
Click the System tab. DSView Server will automatically be selected in the top navigation bar and
Identity will automatically be selected in the side navigation bar. The DSView Server Identity
Properties window will open. The top of the side navigation bar will indicate the name of the
DSView 3 softwareserver.
To change server network properties:
1. Click the System tab.
2. Click Network in the side navigation bar. The DSView Server Network Properties window
will open.
3. Type a new DSView 3 server port number in the HTTPS Port field.
If the default value (443) is modified, the port number in the URL must be specified when
accessing the DSView 3 software. For example, if the IP address of the hub server is 10.0.0.1
and the port number is changed to 444, https://10.0.0.1:444/dsview must be typed in the
Address field of the web browser to access the DSView 3software.
Trap
Destinations
The DSView 3 server polls KVM switches or serial console appliances to determine if they
are responding. If the managed appliance does not respond, the DSView 3 server sends an
SNMP Loss Of Communication (LCM) trap or alert to the external SNMP manager. When
the DSView 3 server detects that the appliance is once again communicating, a Regained
Communication (RCM) trap is sent from the DSView 3 software server.
When a response change occurs during communication between the DSView 3 server and
a managed appliance, the DSView 3 software writes the event to the event log and sends
an SNMP trap to the configured trap destinations.
Trap destinations may also be specified by clicking on a managed appliance and changing
the SNMP appliance settings.
DSView Client
Sessions Settings for inactivity time-out, Single Sign-On (SSO) for the session or restrictions to use
specific IP addresses to start the sessions.
DSView Modem
Session Settings for dial-up sessions, including inactivity time-out, time to wait for a connection and
dial-back number.
Email IP address of the SMTP (Simple Mail Transfer Protocol) server that is used by the DSView
3 software to send email notifications.
Unit Status
Polling
Enables/disables unit status polling for the DSView 3 server, and specifies the delay
between polling cycles and the number of managed appliances that will be
concurrently polled.
Spoke Servers Ena bles you to manage the DSView 3 software spoke servers in your system.
Data Logging Settings for data log file location, archiving and Syslog server.
Table 5.1: Server Properties (Continued)
Property Description