Chapter 8: Adding and Deleting Units 111
b. In the Appliance Name field, type a 1-64 character appliance name. The name is not
case sensitive.
c. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d. In the Port field, type a TCP port number in the range 0-65535 where the appliance
will listen.
e. In the Username field, type a 1-64 character username to be used to log in to the embedded
appliance. Usernames are case sensitive.
f. In the Password field, typ e a 1-64 character password to be used to log in to the embedded
appliance. Passwords are case sensitive.
g. Click Next.
h. The embedded device discovery will verify that a web server exists at the specified IP
address. If successful, the Select Option window will open.
i. Enable or disable the Allow target devices with the same name to be merged into a single
target device checkbox.
j. Click Next. Go to step 8.
6. For HP iLO embedded appliances:
a. The Configure HP iLO Settings window will open.
b. In the Appliance Name field, type a 1-64 character appliance name. The name is not
case sensitive.
c. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d. Click Next. Go to step 8.
7. For NEC IPF embedded appliances:
a. The Configure NEC IPF Settings window will open.
b. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
c. In the Username field, type a 1-64 character username to be used to log in to the embedded
appliance. Usernames are case sensitive.
d. In the Password field, type a 1-64 character password to be used to log in to the embedded
appliance. Passwords are case sensitive.
e. Click Next.
f. The embedded device discovery will verify that the embedded appliance’s product ID
matches the appliance type. If successful, the Select Options window will open.
g. The Appliance Name field contains the name stored in the embedded appliance. You may
change this to a 1-256 character unique name. Names are not case sensitive.
h. Enable or disable the Allow target devices with the same name to be merged into a single
target device checkbox.