304 DSView 3 Software Installer/User Guide
5. Type a 1-64 character name for the task, then click Next.
6. The Select When to Run the Task window will open. Select a time to run the task (see
Specifying when to run tasks on page 292), then click Next.
7. The Select Unit Group window opens. Select All Units or select a unit group, then click Next.
8. The Select Unit window opens. Select the units to be included in the topology update, click
Add, then click Next.
9. The Completed Successful window will open. Click Finish. The Tasks window will open.
Task: Update topology for selected units
Automatic topology synchronization (see Automatic topology synchronization on page 121) is not
supported on some units supported by plug-ins. To keep these units synchronized with the DSView
3 software, you may instead schedule the update topology task.
This task updates the DSView 3 software database when a change occurs in a units. Examples of
changes are the adding/removing of an IQ adaptor, cascade switch or power device. This task
performs the same operations as the Resync Unit Wizard (see Resynchronizing units on page 286).
Once this task is added, you may run it on demand at any time; see Running tasks manually on
page 305.
To add the task:
1. Click the System tab.
2. Click Task s in the top navigation bar. The Tasks window opens.
3. Click Add. The Add Task Wizard appears. Click Next.
4. The Select Task to Add window will open. Select Update Topology for selected units from the
drop-down menu.
5. Type a 1-64 character name for the task, then click Next.
6. The Select When to Run the Task window will open. Select a time to run the task (see
Specifying when to run tasks on page 292), then click Next.
7. The Select Unit Group window opens. Select All Units or select a unit group, then click Next.
8. The Select Unit window opens. Select the units to be included in the topology update, click
Add, then click Next.
9. The Select Options window opens.
a. If you enable the Remove offline connections checkbox, any units connections that are
reported as offline in the unit will be deleted from the DSView 3 software database. The
Update topology for selected units task does not add offline connections to the DSView 3
software database
b. If you enable the Delete target devices that no longer have connections checkbox, target
devices that no longer have connections will be permanently deleted from the DSView 3
software database.