Bacharach 24-9351 Memory Directory Screen, ‘Standard’ PCA Screen, M9 Memory Empty Clear Memory

PCA Operation

4.10 Memory Directory Screen

‘Standard’ PCA Screen

MEMORY DIRECTORY «M8 28.7.97 15:45

M9 MEMORY EMPTY CLEAR MEMORY

‘Advanced’ PCA Screen

MEMORY DIRECTORY «98 28.7.97 15:45

99 MEMORY EMPTY CLEAR MEMORY

The Memory Directory Screen is displayed by repeatedly pressing the MENU key from the Combustion Test Screen. This screen is used to select a memory location that contains saved data which an operator can re- view.

NOTE: A ‘standard’ PCA has 10 memory locations num- bered M0 thru M9, while an ‘advanced’ PCA has 100 memory locations numbered 0 thru 99.

To select a data-memory location, first use the st keys to move the cursor (z) in front of the desired memory location; then press the key. The saved data is now displayed in either the Combustion Test Screen or Draft Screen, depending on whether the chosen memory location contains combustion or draft information. To print the saved data, refer to Sec- tion 4.23.

After viewing or printing the saved data, use the st keys to move the cursor (z) to the exit (E) function; then press . This will redisplay the memory directory.

Selecting the CLEAR MEMORY function displays the Clear Memory Screen from where all saved data can be erased (refer to Section 4.24).

Front Panel Key Functions:

– Move cursor (z) up

– Move cursor (z) down

– Display the data saved at the chosen memory location

– Go to Combustion Test Screen

– Go to Temperature Setup Screen, or the Memory To PC Screen for Advanced units

Instruction 24-9351 4-13