Manuals / Bacharach / Household Appliance / Carbon Monoxide Alarm

Bacharach 24-9351 manual Calibrate TL-Zero, Calibrate TL-ZERO Measured 3.0C

Models: 24-9351

1 100
Download 100 pages 33.06 Kb
Page 54
Image 54

Calibration

PCA

5.6 Calibrate TL-Zero

 

Material Required:

 

• Thermocouple Simulator (K-type)

Range: 0 to 300°C

 

Accuracy: ±0.3°C

Procedure:

 

1.With the analyzer turned off, first plug the simulator’s K-type connec- tor into the T-AIR jack (Figure 3-2); then turn on the analyzer and wait for its warmup cycle to complete.

2.Enter the Calibration Menu Screen per Section 5.3; then choose TL-ZERO to zero the analyzer’s room-air/primary-air temperature channel.

3.Set the simulator to 0 °C (32 °F).*

4.Wait until the MEASURED reading on the screen stabilizes. Then use the st and keys to enter an APPLIED value that equals 0 °C (32 °F).

Typical Calibrate TL-Zero Screen During Calibration Procedure:

CALIBRATE TL-ZERO

MEASURED 3.0°C

APPLIED 0000.0°C

4.Press the key to calibrate the analyzer’s MEASURED value to that of the APPLIED value. At this time the Calibrate Menu Screen is redisplayed.

*The calibration range for this screen is 0 – 5 °C (32 – 41 °F). Any attempt to calibrate outside this range will cause the analyzer to display an error message.

5-6

Instruction 24-9351

Page 53 Page 55
Page 54
Image 54
Bacharach 24-9351 manual Calibrate TL-Zero, Calibrate TL-ZERO Measured 3.0C
Page 53 Page 55

24-9351 specifications

The Bacharach 24-9351 is a cutting-edge combustion analyzer designed for professionals in the HVAC and building maintenance industries. Known for its reliability and precision, this instrument plays a crucial role in ensuring that heating systems operate safely and efficiently.

One of the primary features of the Bacharach 24-9351 is its ability to accurately measure various combustion gases, including carbon monoxide, carbon dioxide, and oxygen levels. This multi-gas measurement capability allows technicians to diagnose combustion problems quickly and effectively, leading to improved system performance and enhanced safety for end users.

The analyzer is equipped with a high-resolution display that provides real-time readings, making it easy for technicians to analyze data on-site. Additionally, the intuitive interface is designed for ease of use, allowing users to navigate through functions and settings without extensive training.

Durability is a key characteristic of the Bacharach 24-9351. It is built to withstand the rigors of fieldwork, with a robust housing that protects it from dust, moisture, and other challenging environmental conditions. This durability is complemented by long battery life, ensuring that users can rely on the device for extended periods without interruption.

In terms of technologies, the Bacharach 24-9351 utilizes advanced sensors that ensure accuracy and repeatability in measurements. Its innovative combustion efficiency calculation provides users with essential insights into the efficiency of their heating systems, allowing for timely adjustments and tuning. This capability not only optimizes performance but also contributes to energy savings and lower operational costs.

Another notable feature is the data logging function, which allows users to store and retrieve measurement data for later analysis. This is particularly beneficial for monitoring system performance over time and making informed decisions regarding maintenance and repairs.

In summary, the Bacharach 24-9351 is an essential tool for HVAC professionals, combining accurate gas measurement, user-friendly design, and robust durability. Its advanced technologies and features make it a valuable asset for ensuring safe, efficient, and effective combustion analysis in various applications. Whether used for routine maintenance or troubleshooting, this analyzer stands out for its reliability and precision.