Bacharach H25-IR manual Appendix a Factory Defaults, Continuous

H25-IR Appendix A

APPENDIX A – Factory Defaults

Table A-1 lists the factory default parameters that are determined by the instrument’s part number (as marked on the rear panel), while Table A-2 lists the default parameters that are user definable.

Table A-1. Default Parameters Defined by Part Number

Part No.	Gas Type	Leak Units	Range	PCHK Mode	Leak Source
3015-4348	R134a*	Oz/yr	Small	Auto	Internal
3015-4434	R600a	g/yr	Small	At CAL	Internal
3015-4448	R134a*	g/yr	Small	At CAL	Internal
3015-4455	R600a	g/yr	Small	At CAL	External
3015-4464	R600a	Oz/yr	Small	Auto	Internal
3015-4465	R600a	Oz/yr	Small	Auto	External
3015-4466	R227	Oz/yr	Small	Auto	Internal
3015-4472	CO2	Oz/yr	Small	Auto	External
3015-4473	CO2	Oz/yr	Small	Auto	Internal
3015-4475	R134a*	g/yr	Small	At CAL	External
3015-4477	SF6	Oz/yr	Small	Auto	Internal
3015-4479	SF6	Oz/yr	Small	Auto	External
3015-4482	CO2	g/yr	Small	At CAL	External
3015-4483	CO2	g/yr	Small	At CAL	Internal
3015-4485	R134a*	Oz/yr	Small	Auto	External
3015-4487	SF6	g/yr	Small	At CAL	Internal
3015-4489	SF6	g/yr	Small	At CAL	External
3015-4496	R227	Oz/yr	Small	Auto	External
3015-4578	R134a*	g/yr	Small	At CAL	Internal
3015-4588	R600a	g/yr	Small	At CAL	Internal
3015-4589	SF6	g/yr	Small	At CAL	Internal
3015-4594	CO2	g/yr	Small	At CAL	Internal
3015-4659	R134a*	g/yr	Small	At CAL	External
3015-4660	R600a	g/yr	Small	At CAL	External
3015-4661	SF6	g/yr	Small	At CAL	External
3015-4662	CO2	g/yr	Small	At CAL	External

*This instrument is capable of detecting CFC, HCFC, HFC and Halogen gases other than R134a. Refer to Section 7 Specifications for a complete list of gases.

Table A-2. Default Parameters Defined by User

Parameter	Default Setting
Relays	NOT USED
Loop	0.016 ppm
Setup Name	SETUP NO. 1
	SETUP NO. 2
	SETUP NO. 3
	SETUP NO. 4
Feedback Mode	CONTINUOUS
Setpoint	00.0000
Log Limit	999.00

All of the above parameters can be reset to their default settings as described in

Section 2.4.9 Reset Defaults.

Instruction 3015-4342 53