Bang & Olufsen HDR 2 manual Pause and replay an on-going programme, Pause a programme

20

Pause and replay an on-going programme

The hard disc recorder lets you take a break in the middle of a TV or STB programme without missing any of it. Just pause the programme and resume it when you are ready.

The hard disc recorder begins saving the current programme in a three-hour buffer the moment you switch on a source, so you can replay what you missed during the break. The hard disc recorder continues saving the programme during replay, so you are sure to see the entire programme.

You can switch directly to the live signal at any time.

*NOTE! On some Beo4 remote controls, the V MEM button is called V TAPE.

Pause a programme

To be able to pause and replay a programme, as well as access the built-in tuner (V.TUNER), you must first set the REPLAY option in the SETUP menu to BASIC or EXTENDED. These settings determine when the hard disc recorder starts saving a programme to the buffer.

>Press V MEM*, then the green button to bring up the main menu.

>Press to highlight V.TUNER or STB and press GO to switch it on.

>The hard disc recorder begins saving the on- going TV or STB programme to the buffer automatically.

>Press or to select a program. Alternatively, use the number buttons to select a program directly.

>To pause the on-going programme, press STOP. The status window appears on the screen. You can now replay the part of the programme saved in the buffer.

>To return to the on-going programme at any time, press V MEM* , then the coloured button for the desired source. You can also ‘jump’ temporarily to the on-going programme and back to replay by pressing and then .

Note that you cannot pause or replay a programme while the hard disc recorder is recording another programme or copying a recording, nor can you pause or replay programs copy-protected by Macrovision. If you pause a programme for two hours, the hard disc recorder automatically starts replay from the point at which you paused the programme.

MENU

HARD DISC CONTENT

TIMER PROGRAMMING

TIMER INDEX

SETUP

V.TUNER

STB

RECORD

Menu	stb
v.tuner	record

If you wish to be able to pause and replay an on- going TV programme, it is important that you select V.TUNER, instead of pressing the TV button on Beo4!

- 0:19 REPLAY -0:05

An example of the status window. A programme is being replayed after a pause. The time to the left shows for how long you have been copying the on- going programme to the buffer – 19 minutes. The time to the right shows the time of the current picture is five minutes behind the live signal.

In addition to TV programmes, you can pause and replay set-top box programmes, provided you have connected a set-top box to the hard disc recorder.