Bang & Olufsen HDR 2 manual While your equipment is on …, Press GO and then the number, Exit

35

Direct Beo4 operation

If you know which Beo4 button activates the function you want, you can activate the function without bringing up the Peripheral Unit Controller menu first.

While your equipment is on …
Press GO and then the number	GO
button that activates the	1 – 9
function you want
Press one of the coloured
buttons to activate a function
Press GO and then or to	GO
step up or down through, for
example, set-top box channels
Press and hold GO to bring up	GO
the Program guide or the ‘Now/
Next’ banner on the screen if
you are using a set-top box that
supports these functions.

Use equipment menus

Once you have activated connected equipment, you can operate its own menus with Beo4.

While equipment menus are shown …

Moves the cursor up or down

Moves the cursor left or right
Selects and activates a function	GO
	GO
Press GO and then or to	GO
step between menu pages or
step in channel lists
Exits menus, or returns to a	STOP
previous menu*
Use the number keys to enter	1 – 9
information in menus or services
when relevant
Exits menus, enters or exits	EXIT
different modes, such as radio
Use the coloured buttons as
indicated in the menus of your
connected equipment

*Depending on the source you have selected, you may have to press EXIT twice instead of STOP to return to a previous menu.

Use equipment in a link room

If your set-top box is connected to the television in the main room via the hard disc recorder, or connected directly to the television, you can operate the set-top box from the link room television. However, the Peripheral Unit Controller menu cannot be displayed on the television screen in the link room.

Press to switch on equipment in	V MEM
the main room
Press GO and then the number	GO
button that activates the	1 – 9
function you want
Press one of the coloured
buttons to activate a function