4. Setup

Remote control functions.

Thisremote control includes a battery powered infrared (IR) transmitter that allows the user to control theprojector remotely. This
remotecontrol is used for source selection, control, adaptation and set up. It includes automatic storing of picture controls (Bright-
ness, Sharpness...) and settings.
Other functionsof the remote control are :
• switchingbetween standby andoperational mode.
• switchingto "pause" (blanked picture, fullpower for immediate restarting)
• direct access toall connected sources.

Diagnose LED’s

Green Red
LED1 cool down sequence: flickers 60 seconds (120
secondsin cas e of iQ 400 series) after switching to
standby
rescue program (software error)
LED2 only for the versions containing a server:
shows when projector is in
standby and server is active.
hardware error
LED3 IR acknowledgement continue: standby
flickers: Security = ON
4.2 Terminology overview
Overview
The followingtable gives an overview of the keys.
26 R59770134 ID LR-6 27/05/2011