Belkin F1DE101G Control Description Options, Scaling, Preserve all display details, Remote system

USING YOUR RIPC

connection to be made, i.e. if you are working over a private internal network your NAT (Network Address Translation) firewall settings must be configured accordingly. In other words, if the RIPC is connected to your local network environment and your connection to the Internet is over a proxy server only, failure to configure NAT correctly will make it very unlikely that the Remote Access will be able to establish the connection. This is because web proxies are not capable of relaying the RFB protocol.

If you are unsure about this issue, please consult your network administrator for an appropriate network environment.

Remote Access window attempts to display the remote screen at its optimal size, so that it may resize to match the remote screen initially, as well as following a change of the remote screen’s resolution. You can always resize the Remote Access window using your local window system.

A control bar on the lower part of the Remote Access window houses a control bar that displays Remote Access status and lets you adjust its settings. The following table defines the Remote Access control options:

Control		Description
Options		Allows you to scale down the Remote Access. You can still use
	Scaling	the mouse and keyboard, however, the scaling algorithm will not
		preserve all display details.
Options		The submenu for mouse handling offers two options for
	Mouse Handling	synchronizing the local and the remote mouse pointers.
Options		Opens a panel for changing the RIPC’s video settings.
	Video Settings
Hot Keys		Special button keys to send the defined key combinations to the
		remote system.
KVM Keys		If defined in KVM Port Settings, you can switch the current KVM
		port by sending the appropriate hot key to the KVM switch.
Read Option		Toggles the read-only mode on and off. If the Monitor mode check
		box is selected, the Remote Access will not accept any local input
		for either keyboard or mouse. The symbol indicates whether or not
		monitor mode is currently active.
Auto Adjust		Starts the auto adjustment procedure to determine the settings
		for best visual quality of the current image being displayed on
		the RIPC.

19