Modem Settings, Serial Port | Belkin F1DE101G guide

NETWORK SETTINGS MENU

Serial Port

The RIPC’s Serial Settings allow you to specify which devices are connected to the serial port and how to use them. The options are listed and described in the table below.

Serial Port Settings Table

Function	Description

Modem	Allows access to the RIPC via modem; see Modem
	Settings below, for details.

Port Access	Using this option, it is possible to connect an arbitrary
via Telnet	device to the serial port and access it (assuming it
	provides terminal support) via Telnet. Select the
	appropriate options for the serial port and use the
	Telnet unit or a standard Telnet client to connect to
	the RIPC.

Serial Port Settings Menu

Modem Settings

The RIPC offers remote access using a telephone line in addition to the standard access over the built-in Ethernet adapter. The modem needs to be connected to the RIPC’s serial interface.

32

Image 34

Belkin F1DE101G user manual Modem Settings, Serial Port Settings Table

Contents

OmniView Table of Contents Package Contents Introduction Feature Overview Hardware Requirements Equipment RequirementsSoftware Requirements Specifications Link/Activity LED Ripc DiagramsConnection LED Serial 02 Port LAN Port Installation Hardware Installation Serial Power Reset Connecting the Computer or KVM USB Powering Up the Ripc Initial Network Configuration Connecting the Ripc to the Network Video settings Remote AccessSync Configuration via serial Prerequisites Following interfaces are supported Log Into the Ripc For a secure connection, you must enter Main Screen Control Host Remote Access Log Out from the Ripc Auto Adjust Port by sending the appropriate hot key to the KVM switchMonitor mode is currently active Control Description Options Ripc Mouse Synchronization Remote Access OptionsPower Management Unit Sync Detect Limitations of the Mouse Synchronization Single Direct Mouse ModeBadly Adjusted Picture Special Mouse Driver Video Settings Https Port Ports & ProtocolsForce Https Http Port IP access control parameters Firewall Certificate Management SSL Certificate Request Certificate Request Required Information See Figure below Settings & Configuration Network SSL Certificate Signing Request Network Settings Menu Remote Access Settings Remote Access Options Table Users & Passwords Delete User Description Users & Passwords TableAdd User Modify User Serial Port Settings Table Modem SettingsSerial Port Modem Options Table Keyboard/Mouse Settings Keyboard/Mouse Options Table KVM Switches Firmware Syntax to define a new hot key is as follows Update Firmware Ripc Video Modes Hot Key Table Tilde Glossary What operating systems does the Ripc support? Does the Ripc work with non-Belkin KVM switches?Does the Ripc put any strain on the servers? Remote mouse doesn’t work or is not synchronous Login failsRemote Access window can’t connect to the Ripc Video quality is bad or the picture is grainy FCC Statement Belkin Corporation Limited Five-Year Product WarrantyCE Declaration of Conformity P74238-A