Quick Start Guide
Quick Start Guide
1. Connect the projector’s VGA cable to the AC1132A’s VGA connector and power up the projector.
Figure QS-1. Connect the AC1132A to the projector.
2. Power on the AC1132A box.
When the projector shows the default menu on the screen as below, it indicates the AC1132A unit is ready.
Figure QS-2. Default menu.
3.Make sure your PC WLAN is enabled already, and connect your PC with the AC1132A unit.
4.Open your browser and it will redirect to the WPS home page automatically, or you can enter the IP address to access the Wireless Video Presentation System’s Web home page.
AC1132A | Page 7 | |
|
|
