Quick Start
Compliant Installation
Compliant Installation
Power Cables
Ferrite Beads
Ferrite Bead
are in red
with cable loop
Power Cord
Grounding Cable
Alarm Wiring
T1/E1 connectors
Signal Cables
1.Connect all of the signal cables as shown in the illustration above, and secure them with a plastic tie. Dress the signal cables toward the left of the unit.
2.If using the 115V Power Supply, connect the
3.Secure the ground lugs to the terminals using the nuts provided.
4.Secure the power cable and the ground cable with a plastic tie (not included). Keep these cables separate from the signal cables.
5.Terminate each signal cable to its appropriate connector.
6.Secure the signal cables using the small holes along the bottom of the rack and plastic ties (not included).
NOTE: It is important that the Signal Cables are secured separately from the Power Cables, for proper equipment operation.
Compact T1 - Release 6.1 | 9 |
