Quick Start
Controller Cards
LEDs
The T1 Controller has a set of six LEDs you can use to troubleshoot your Compact T1. The table below describes each LED.
LED | State | Description | |
|
|
| |
MAJOR | Off | No major alarms present | |
|
|
| |
| Red | Major alarm present | |
|
|
| |
MINOR | Off | No minor alarms present | |
|
|
| |
| Yellow | Minor alarms present | |
|
|
| |
LOCAL | Off | Remote mode (DIP switches disabled) | |
|
|
| |
| Green | Local mode (DIP switches enabled) | |
|
|
| |
ACO | Off | Normal mode. No alarms are being | |
|
| suppressed. | |
|
|
| |
| Yellow | Alarm cutoff active. One or more active | |
|
| alarms suppressed. | |
|
|
| |
Off | Off line | ||
|
| ||
Green | Normal | ||
| |||
|
|
| |
| Red | Loss of Signal (LOS) detected | |
|
|
| |
| Yellow | Bipolar Violation (BPV) detected | |
|
|
| |
| Flashing Green | Loopback active | |
|
|
| |
| Flashing Red | Loss of Frame (LOF) or Alarm Indication | |
|
| Signal (AIS) detected | |
|
|
| |
| Flashing Yellow | Yellow alarm (Remote Alarm Indication) | |
|
| detected. | |
|
|
|
Compact T1 - Release 6.1 | 31 |
