Black Box COMPACT T1 quick start Set Up the Router IP or CMG Cards, Quick Start

Quick Start

Configuration

Set Up the Router (IP or CMG) Cards

See the Router (IP or CMG) Quick Start Guides for detailed information. The following is the basic setup, see the Router family User Manuals or Quick Start Guides for the following configuration setups:

λPPP Internet Connection and Public IP Address Routing

λFrame Relay Internet Connection and Public IP Address Routing

λInternet Connection using PPP, NAT/PAT and Firewall Filters

λInternet Connection using NAT and Static NAT Addresses

λPPP Internet Connection and Public IP Address Routing

λBack-to-Back with PPP

Command

set {ds0-addr} type data

connect {slot:port:trunk} {slot:port:channel}

set {router-addr} proxy

set {slot:port} up

telnet {router_card-addr}

Local and Remote Profile Setup reinitialize

Description

Confirm DS0 is set to type data. ds0-addr = {slot:port:channel} of DS0 Example: set a:1:1-24 type data

Cross-connect T1 to router card.

Example: connect a:1:1-24 6:1:1 (router in slot 6)

Disable/enable router proxy. router-addr = {slot:port} of router card. Example: set 6:1 proxy disable.

Set Router LAN as In-Service.

Example: set 6:1 up

Telnet to Router card.

router_card-addr = {slot} location of router card Example: telnet 6 (if earlier than 3.0 release {slot:port} must be used)

To enable any configuration changes, the card must be reinitialized.

Compact T1 - Release 6.1 25