Quick Start
Service Cards
FXS Card
DIP Switch Settings
Each FXS card contains ten DIP switches that can be used to select signaling options for all eight channels.
Switch | Function | Description | Note | |
Signal | 1 2 |
|
| |
| Type |
|
|
|
| 0 0 = FXS Loop Start | FXS and FXS5G card | ||
|
| |||
|
| 1 0 = FXS Ground |
| |
|
| Start |
|
|
|
|
|
| |
|
| 00 = R2 | FXS INTL card | |
|
|
|
|
|
Receive | 3 4 5 6 |
| These settings allow for receive gain | |
| Gain/Loss |
|
| and losses of |
| 0 0 0 0 | = 0 dB | ||
|
| |||
|
| 0 0 0 1 | = | |
|
| (1110) is not available. | ||
|
| 0 0 1 0 | = +2 dB | |
|
|
| ||
|
| 0 1 0 0 | = +3 dB |
|
|
| 1 0 0 0 | = +4 dB |
|
|
|
|
| |
Transmit | 7 8 9 10 | These settings allow for transmit gain | ||
| Gain/Loss |
|
| and losses of |
| 0 0 0 0 | = 0 dB | ||
|
| 2, 3, 4, 5, 6, and 7. +9 (1110) is not | ||
|
| 0 0 0 1 | = | |
|
| available. | ||
|
| 0 0 1 0 | = +2 dB | |
|
| Maximum setting on the 5G is +6 dB. | ||
|
| 0 1 0 0 | = +3 dB | |
|
|
| ||
|
| 1 0 0 0 | = +4 dB |
|
|
|
|
|
|
LEDs
Each port on the FXS card has its own LED, as described in the table below.
State | Loop Start | Ground Start Meaning |
| Meaning |
|
|
|
|
Off | N/A | Idle (tip open) |
|
|
|
Green | Idle | Tip ground (incoming seizure) |
|
|
|
Red | N/A | Ring ground (outgoing seizure) |
|
|
|
Yellow | Call in progress | Call in progress |
|
|
|
Flashing green | Ringing | Ringing |
|
|
|
34 | Compact T1 - Release 6.1 |