Quick Start
Compliant Installation
Ferrite Beads
To be compliant with Part 15A of the FCC and for NEBS compliant facilities, the following beads are included with each chassis, as well as additional ferrite bead(s) with the Service cards listed below.
Ferrite Beads shipped with Adit chassis:
Ferrite Provided | Intended For | |
|
|
|
1 large | (1) | Power (AC or DC) cable |
|
| |
3 small | (2) One on each T1 cable | |
| (1) | Ethernet |
|
|
|
Service Card Cables that Require Additional Ferrite Beads:
Card | Ferrites | Intended For |
| Shipped |
|
| with Card |
|
ISDN BRI | 2 large | (1) |
|
| telco, |
|
| (1) Alarm cable (requires a loop through the bead, see |
|
| drawing above) |
|
|
|
1 large | Alarm cable (requires a loop through the bead, see | |
|
| drawing above) |
|
|
|
Quad T1 | 2 large | T1 cables from front of Quad T1card |
|
| (1 bead can hold |
|
| (2) One on each |
|
|
|
IP Router | 1 small | Ethernet Cable (from front of card) |
|
|
|
CMG Router | 1 small | Ethernet Cable (from front of card) |
|
|
|
For additional information on Ferrite beads and their installation on the unit, please contact Customer Support.
10 | Compact T1 - Release 6.1 |
