RS-232 Craft Port Female DB-9 | Black Box COMPACT T1 specification

Quick Start

Interface Connectors

RS-232 Craft Port (Female DB-9)

The RS-232 craft port connector (female) is for connection to an external PC or Hayes- compatible modem for local or remote configuration, management, and performance monitoring using the Command Line Interface (CLI).

The RS-232 craft port connects via a
female DB-9 connector on the Unit.
female DB-9 connector on the Unit.				1		5
		6				9
The pinouts are as follows:

Pin Number	Direction	Description

1	Outbound	Carrier Detect

2	Outbound	Receive Data

3	Inbound	Transmit Data

4	Inbound	Data Terminal Ready

5	N/A	Signal Ground

6	Outbound	Data Set Ready

7	Inbound	Request to Send

8	Outbound	Clear to Send

9	N/C	Not connected

18	Compact T1 - Release 6.1

Image 22

Black Box COMPACT T1 quick start RS-232 Craft Port Female DB-9, Direction Description

Contents

Compact T1 Supporting Software Version Safety Information Preface Electrostatic Discharge ESD Precautions Quick Start Installation Environment Unpacking and Inspection Assembly of Compact T1 Wall Mounting Rack Mounting Optional Feature To rack mount the Unit, follow the instructions below Heat Baffle Left Side View Thumbscrew Quick Start Compliant Installation Power Cables Ferrite Beads Service Card Cables that Require Additional Ferrite BeadsFerrite Beads shipped with Adit chassis Chassis Connectors and Buttons Interface Connectors Chassis Ground Connector Ground Terminals AC Power Power ResetPower Connections 48V Battery To connect -48 VDC power External Alarm Connector Pin # Description Explanation Pair Telco Connectors Pair Pin Location Function Color Code Quick Start RS-232 Craft Port Female DB-9 Direction Description T1 RJ-48C T1 Connection Ports10Base-T Ethernet Ethernet RJ-45 Set the port settings to 9600 baud 8/N/1/No Flow Control Command Line Interface CLISetting up a CLI connection Local and Remote Management Option Configuration Set Up Security Initial SetupCommand Set Up a DS1/T1 Set Up a DS0/Channel Set Up an Analog Port Set Up the Router IP or CMG Cards Set Up a Isdn BRI Service Establish a Static Channel Connection Set Up the OCU-DP Card Set Up a V.35 Port Change the IP Address of the DS0 Management Channel Upgrade the Router IP or CMG Software Upgrade the Controller SoftwareInstall Country Specific Ringer Tones Controller Cards Dip SwitchesSwitch Function Description T1 Controller Card LEDs State Description Power Supplies 115 VAC/-48 VDC Power Supply DIP Switch Settings Service CardsFXO Card FXS Card FXS Intl card Isdn BRI Card OCU-DP Card Quad T1 Card 35/V.54 Card CMG Router Card CRD IP Router Card COL