SERVSELECT II™ INSTALLER/USER GUIDE
2.Select Enable Screen Saver.
3.Type the number of minutes for Inactivity Time (from 1Ð99) to delay activation of the screen saver.
4.Choose Energy if your monitor is ENERGY STAR¨ compliant; otherwise select Screen.
CAUTION:
Monitor damage can result from using Energy mode with monitors not compliant with ENERGY STAR¨.
5.(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box.
6.Click OK.
NOTE:
Activation of the screen saver mode disconnects the user from a server; no server is selected.
The status flag displays Free.
To exit the screen saver mode:
Press any key or move your mouse. The Main dialog box appears and any previous server connection will be restored. If a digital user is on that connection, they will be disconnected and will receive a preemption message.
To turn off the screen saver:
1.In the Security dialog box, clear Enable Screen Saver.
2.Click OK.
To immediately turn on the screen saver:
Press Print Screen, then press Pause.
4.5 Displaying Version Information
The OSD enables you to display the ServSelect II and SAM firmware versions. For optimum performance, keep your firmware current. For more information, see Chapter 6.
To display version information:
1.Press Print Screen. The Main dialog box will appear.
2.Click Commands - Display Versions. The Version dialog box appears. The top half of the box lists the subsystem versions in the appliance.
28
