Black Box LR1530A-R3, LR1530A-EU-R3 manual Identify the Connectors, Rear View of the CSU-DSU router

Installation

Identify the Connectors

Each unit is configured with both straight (MDI) and crossed over (MDI-X) 10BaseT LAN connectors; the router will auto-sense between the two. Only one connector may be used at a time.

The router is produced with four different WAN interface modules: V.35, CSU-DSU, Universal WAN or T1/E1. The type of module in a unit may be determined by looking at the label over the WAN connector on the back panel.

CSU-DSU

Figure 1 - 1 Rear View of the CSU-DSU router

UNIVERSAL WAN

Figure 1 - 2 Rear View of the Universal WAN router

V.35

Figure 1 - 3 Rear View of the V.35 router

T1/E1

Figure 1 - 4 Rear View of the T1/E1 router

6